Single Row Four Point Contact Ball Slewing Bearing(Series 01)  
Single Row Crossed Roller Slewing Bearing (Series 11)  
Double Row Ball Slewing Bearing (Series 02)  
Three Row Roller Slewing Bearing (Series 13)  
Single Row Crossed Rollers Slewing Bearing (Series HS)  
Single Row Four Point Contact Ball Slewing Bearing (Series Q)  
Single Row Crossed Roller Slewing Bearing (Series HJ)  
Light type profile slewing bearingI(Thin Section)  
Light type profile slewing bearingII(Flange Form F)  
  Load chart ( series 13)  
  Load chart ( series 11)  
  Load chart ( series 02)  
  Load chart ( series 01)  
Maintenance of Slewing Ring and Lubricant Use   time��2016 .5.12click2932
Slewing ring is a very important parts in engineering machinery, it can control the mechanical operation.
Selection lubricant carefully will extend the service life of slewing ring.In order to prevent the slewing ring  using problems in the future, please keep good maintenance.
Before slewing ring leave factory,some grease should be in the raceway of slewing ring .Before the slewing ring work ,please change the grease and filling in enough grease according to your different working conditions,you can choose NO.2 EP grease .
Ball slewing ring is lubricated every 100 hours ,roller slewing ring is lubricated every 50 hours.Fill the raceway with grease till it is seeping from the seals.Also check the pre-tightening force of slewing ring , must keep enough pre-tightening force.
Give you attention to the runing slewing ring,you should stop it to check when noise,impulsion or other problem unable to run .Trouble shooting and guarantee the operation will not have any problem.
About cleaning,it can not cleaning with water directly , prevent water into the raceway, prevent hard object or debris into the raceway and lead to the teeth of slewing ring teeth mismatch.
Check the seal usually ,change it when its damaged.To prevent serious problem in the process of running.
International Trade Dept. Tel: 86-516-83206168 Fax:86-516-83205618
Mobile: 86-15152128886(Sales Manager) Email:
Copyright (c) 2010 Xuzhou Xinda Slewing Bearing CO.LTD All Rights Reserved
Produts:Slewing Rings Turntable Bearings Slewing Bearings Slew Bearings